GENERAL SPECIFICATIONS
TypePowered Bluetooth aptX HD speaker system
Amplifier TypeClass AB
Power Output120 W peak power total (30 W RMS / 60 W peak per channel), AES
Drivers4″ aramid fiber woofers
0.75″ silk dome tweeters
Inputs3.5 mm stereo mini-jack, USB, RCA L/R, Bluetooth
OutputsRCA variable line-out, 3.5 mm mini-jack headphone out
Input Voltages110-240 V 50/60 Hz auto-switching
SNR>95 dB (typical A-weighted)
THD+N<0.05% at all power settings
Crosstalk<50 dB
Frequency Response60 Hz-22 kHz ±1.5 dB
Input Impedence5K ohms unbalanced
ProtectionOutput current limiting, thermal over-temperature, power on/off transient protection
Power ConsumptionIdle: 10W
BLUETOOTH SPECIFICATIONS
Internal D/A Converter
PCM 5102
Input Bit Depth
24 bit (padded)
Bluetooth Receiver Type
Bluetooth 5.0
Supported Codecs
aptX HD, aptX, AAC, SBC
Wireless Operation Range
Up to 100 ft (30 m) typical
Input Data Rate
Determined by Bluetooth
Wireless Latency
~30 milliseconds (ms)
USB SPECIFICATIONS
Connector Type
Micro-USB
USB Device Class
USB 1.1 or above
Input Bit Depth
24 bit (padded)
Input Sample Rate
44.1 kHz/48 kHz
HEADPHONE AMP SPECIFICATIONS
Headphone Amp Type
OPA2134
Full-scale Headphone Output Level
2.0 V RMS
Output Impedence
2 ohms
Recommended Headphone Impedence Level
10 ohms to 10K ohms
WEIGHTS AND MEASURES
Dimensions (HWD)
Each speaker – 9″(23 cm) x 5.5″ (14 cm) x 6.5″ (16.5 cm)
Weight
Left (active) – 7 lb (3.2 kg)
Right (passive) – 5.2 lb (2.4 kg)
Total Shipping Weight
16 lb (7.3 kg)
Shipping Box Dimensions (LWH)
20″ (51 cm) x 13″ (33 cm) x 15.5″ (39 cm)
ENVIRONMENTAL REQUIREMENTS
Operating temperature: 32 degrees F to 95 degrees F
Non-operating temperature: -4 degrees F to 113 degrees F
Relative humidity: 5% to 95% non-condensing
MATERIALS AND CONSTRUCTION
0.7″ (18 mm) thick MDF cabinets with real wood veneer
0.75″ (20 mm) silk dome tweeters with neodymium magnets
4″ (101 mm) aramid fiber woofers with advanced voice coils